Interview with Chris Stamp, designer of 007 Aston Martin DB5 and 1970 Dodge Charger
Posted by CapnRex101,
Following our past discussion of the broader Speed Champions theme, Chris Stamp, Design Manager for the range, agreed to answer some questions about the new film vehicles too.
Our conversation encompasses the origins of these additions to Speed Champions, whether including functions was discussed and how the Aston Martin and Dodge Charger were chosen.
Brickset: What prompted the introduction of these movie-inspired cars?
Chris: Looking back through the development and direction of Speed Champions, we have already expanded to include vehicles other than supercars, including the John Cooper Works buggy, Lamborghini Urus and the Ford Bronco Dakar racer. Fundamentally, the theme’s identity is collectable, IP-driven, eight-stud-side vehicles which are all in scale when displayed together. There are really no limits on what we can do, as long as they satisfy those flexible parameters.
On a personal level, I am a huge movie fan, so I have been moving towards creating these vehicles for the last three years. Also, not everyone who likes cars is interested in racing, so introducing some recognisable film vehicles felt completely natural to me. Broadening the appeal of the theme, without losing what we have already built, is never a bad thing.
It is perhaps surprising that producing these affordable film vehicles has taken so long, given their likely popularity. Has anything delayed the introduction of these movie cars?
Not as such. Speed Champions is a very small project, among the smallest in the current LEGO portfolio, so creating space in the product range for more Speed Champions sets is sometimes difficult. Even introducing the polybag models was considered quite exciting, when those began a couple of years ago! We have so many ideas for potential models that finding the opportunity to produce them is the greatest challenge.
In the case of these movie vehicles, I was determined to release more than one product at their launch because I wanted to signal this as the beginning of a collection. Finding space for two new sets in the portfolio made things even harder, although developing vehicles which have already been represented in LEGO and achieved proven popularity was helpful.
On the other hand, some questioned whether we needed to revisit vehicles portrayed before. The potential may be obvious to you or I and I think the final products speak for themselves, but there are many internal stakeholders and everybody must be persuaded before the proposed products receive approval. Regardless, I consider the result well worth it.
What can you tell us about the first of these cars, the Aston Martin DB5?
I have designed plenty of Speed Champions cars, including the Ferrari F40, Audi Quattro, Ford Bronco and Ferrari 512M, all the way back to the very first Speed Champions: Ferrari LaFerrari in 2015 but this is definitely the hardest I have ever worked on. The vehicle is outwardly fairly basic, but the details are incredibly subtle and failing to recreate those details can spoil the whole design because the subject is so iconic.
It was therefore necessary to introduce some new parts, most noticeably for the back windscreen. The complex compound curvature was essentially impossible to replicate with existing pieces and creating this one also provides a chance to look all the way through from front to back, which is a first for Speed Champions. As always, we made sure to develop a potentially versatile element, so this could quickly be reversed to become a front windscreen or canopy and including side windows strengthens the whole piece.
The second is used at the back, continuing to fulfil our promise that headlights and tail lights will be printed on Speed Champions cars. We did not actually create this 1x2 tile with curved ends, but the Aston Martin will mark its first appearance in a set, featuring the three distinctive tail lights. The headlights are also printed on a 1x1 quarter dome, which was designed specifically for this model. That should prove very useful for other models and I hope the new 1x2 inverted slope will be useful too. We developed that element unusually late because any alternative solutions for filling the area between the headlights and the wheel arches were incredibly complicated, mainly due to the bumpers being nine modules wide and protruding by half a module to the front, left and right.
Lastly, we created a wheel insert for the Aston Martin DB5, simply because the spokes and retracted tyre shredders are so recognisable with the vehicle. That is not something we can do for every Speed Champions car, but it was absolutely essential here. Also, the element looks beautiful with a metallic finish!
Saying all that, the most difficult challenge was actually the offset bumper. The original vehicle has a pronounced bumper at the front and rear, which interrupts the structure between the chassis and much of the bodywork. Fortunately, 2x2 slider elements gave the necessary shape and support at either end, without widening the bumper too much.
Were any functions considered?
I did consider including gadgets, but it was not possible without compromising the outward display value. The ejector seat, for example, would need to fit within the height of a single plate and I cannot imagine how that could be done. The Creator Expert model excelled in that regard, so prioritising the appearance of the DB5 was definitely the way to go for Speed Champions. If there was a chance to include functions without affecting the exterior, then we would, but any gadgets found on the Aston Martin DB5 would be quite parts-intensive.
Would it have been possible to include swappable sections for gadgets? For instance, maybe the headlights could be removed and replaced with miniguns.
Not really because those detachable sections would need to be easily removable, so attaching the headlights for easy removal would have complicated the design even more. Designers working on Speed Champions now and in the past have already questioned whether it is possible to recreate certain vehicles at this scale and needing to account for detachable structures would make things harder still. Challenges are welcome though, as they only encourage myself and other designers to find solutions.
Also, we have to consider the LEGO brand and whether miniguns or machine guns would really be appropriate, even in a fictional setting. Pure fantasy weapons are one thing, as you see in Star Wars, but realistic weapons are more difficult and best avoided for Speed Champions.
However, we have included alternative number plates to reflect the different movies. The model is inspired primarily by No Time to Die, so lacks the bulletproof screen from earlier movies because the identifying ridge behind the rear windscreen is missing from the car from No Time to Die. We were determined to acknowledge its past appearances though, with the number plates. My sketch model also included the GB sticker from Goldfinger, but we decided to omit that, ultimately.
Presumably the No Time to Die inspiration determined which version of James Bond is included too?
Indeed, it had to be Daniel Craig, not only because of the new film but because we want to appeal to car fans of any age and younger builders are probably more likely to be familiar with those modern movies. Adults will obviously be equally familiar with the other actors and I would have loved to include Sean Connery’s Bond, in particular, but I think Daniel Craig’s portrayal was the logical choice. Of course, Eon Productions also influenced that decision, as a licence partner.
How was Dominic Toretto’s Dodge Charger chosen to accompany the Aston Martin DB5?
Fast and Furious is probably the most famous film franchise associated with cars and provides ample source material. Among many possible vehicles, the Dodge Charger is arguably the most identifiable and is obviously affiliated with the main character from the series, giving an opportunity to produce the Dominic Toretto minifigure. Since we are exploring Fast and Furious at minifigure-scale, including Dom is a necessity really!
How does the new Dodge Charger improve upon past LEGO Dodge designs?
We always try to explore new subjects within Speed Champions, so having a chance to revisit the Dodge Charger was interesting and we certainly took feedback on board, not only from our own 6 wide Charger and 8 wide Challenger models, but also 76173 Spider-Man and Ghost Rider vs. Carnage and even the extremely large Technic version. Firstly, understandable criticism was levelled against the sharp corners of the roof on our Dodge Challenger from 2020, so I made sure to soften that shape with the 1x1 quarter circle tiles.
Furthermore, the scale allowed us to include greater detail than was possible on the six-wide 1970 Dodge Charger we released in 2019, introducing some subtle curves and texture. The door handles and vents on the side help to avoid a completely boxy shape, while the engine and tail lights are far more detailed as well.
The interior is also much-improved and that is actually something that differentiates these film cars from others in Speed Champions. We like designing realistic interiors for every model, but some are fairly bland because there is not much to see on the original car, at least that would be noticeable at the scale of a LEGO rendition. However, the onscreen Dodge Charger contains an elaborate roll cage, fire extinguisher and the sideways gear shifter, which are all replicated here, while the Aston Martin DB5 includes back seats, in another first for Speed Champions and the handbrake between the driver and the door!
When creating potential movie vehicles for Speed Champions, how strictly must you consider their actual speed?
I think we have a degree of flexibility, within reason. I would not consider the Aston Martin DB5 to be particularly associated with speed and I think choosing iconic subjects is more important than focusing exclusively on quick vehicles. For now, there is no need to restrict ourselves to specific vehicles. Speed Champions is about building fans’ dream vehicle garage, without limitations on what they might be.
Thank you for speaking with us.
You can read our previous interview with Chris below, in two parts, which encompasses how vehicles are chosen, quality issues and minifigures in Speed Champions sets:
- Interview with Chris Stamp, Speed Champions Design Manager - Part 1
- Interview with Chris Stamp, Speed Champions Design Manager - Part 2
117 likes
53 comments on this article
One of the things I love about the Speed Champions team is you know they're making their sets for adults, even more so than for kids. And it really shows in the building styles and techniques that they include.
Another thing I really appreciated is they acknowledge where they tried to do something and weren't able to get it in the production model. Like omitting play functions as it would hamper the display model.
I'm looking forward to seeing what other movie vehicles we see in the future as there's so many cars (and trucks) that they could do.
There is so many great cars to choose from I can’t wait!!!
Speed Champions needs to add the flywheel system from the City Stuntz sets. It adds a whole new dimension to these cars.
So glad to hear that the Speed Champions theme design team are exploring Fast and Furious at minifigure-scale.
I misread that as "Chris Stamper" for a second, my head is way too stuck inside the video game scene lol
I'll have to give this a read when I have a minute later, looks very interesting!
I doubt it'll happen as it's not a "real" car model, but the Mach Five from Speed Racer is my dream future Speed Champions set.
Great interview, some great insight into the design process. I'm hoping for an 08 Camaro concept Bumblebee from the 2007 Transformers in this line at some point now we've opened the licensing door with Optimus Prime. Seems like it would be a great fit.
Great interview, thanks!
@SpiderAvenger said:
"I doubt it'll happen as it's not a "real" car model, but the Mach Five from Speed Racer is my dream future Speed Champions set."
That’d be really awesome, and I’d totally welcome a broader array of fantasy cars.
Speed Champions is one of the only lines that I really collect because
1.) It’s actually affordable!
2.) All the models, regardless of subject material, usually have some really interesting construction techniques and pieces.
Having an enjoyable build experience is the most important part of any Lego set for me, and SC provides an excellent value-for-money in this regard. I daresay there’s no other line that uses such inventive construction methods on such inexpensive models - normally you’d have to be looking at a $100+ Ideas set if you wanted this level of creativity.
The cars look so much better in 8 wide, too. That couldn’t have been an easy decision to make, but it was TOTALLY worth it. We need to revisit the Mustang in this scale!
@SpiderAvenger said:
"I doubt it'll happen as it's not a "real" car model, but the Mach Five from Speed Racer is my dream future Speed Champions set."
Done already 8158 and 8161
@Rimefang said:
" @SpiderAvenger said:
"I doubt it'll happen as it's not a "real" car model, but the Mach Five from Speed Racer is my dream future Speed Champions set."
Done already 8158 and 8161"
Sure, but I reckon it could probably be done a lot better with modern parts and techniques.
I hope to see Herbie show up. I know he'd be hard, because of his shape, but he'd be my most wanted movie car. Great article!
@Darth_Dee said:
"Speed Champions needs to add the flywheel system from the City Stuntz sets. It adds a whole new dimension to these cars."
Likely a Price dimension increase to €40 a car.
I love designer interviews! thanks @CapnRex101!
I'll echo the Mach 5 and Herbie, and add in Chitty Chitty Bang Bang.
Adding K.I.T.T. and the A-Team van to line would be cool. The Dimensions versions were fun.
Interesting interview, although it would have been good to hear his thoughts on the use of such poorly colour matched stickers on the Aston... I'm sure he can't have been too impressed with those!
Still a great theme, and the only one I have complete (apart from the Mercedes Team gift set... I'm not completist enough to need half a retail set!)
Hoping for a Love Bug, a FAB 1, and a Monkeemobile!
He did an amazing job with the DB5.
Until now I never cared about Speed Champions since I don't really care about cars (I mean, I like to drive them but don't ask me anything technical about them...or to name models my heart. And definitely don't ask me anything about racing).
But I will be absolutely on board with having Speed Champions do more of these film-based cars, specially if they bring a special minifigure alongside them. The only think I'd maybe add would be a small info plaque.
Make Knight Rider's Kitt, the A-Team Van, The Addams Family Packard V-12, Cruella's Panther De Ville...and I'll be all other them on release day.
Thanks for the interview. I’m a huge Star Wars fan but as a car fan I think Speed Champions is my favourite theme these days, so it’s always good to hear from the design team.
I wonder if they’ll do a DeLorean at this scale again. The Ideas set was alright but awkward, so an update would be lovely. And they should do The Simpsons’ pink family car again too :D
What software do they use at Lego? It is not stud.io?
@gsom7 said:
"What software do they use at Lego? It is not stud.io?"
It's some proprietary software. From what I recall, it used to be a version of LDD turned up to 11. None of it is available publicly...
@Darth_Dee said:
"Speed Champions needs to add the flywheel system from the City Stuntz sets. It adds a whole new dimension to these cars."
More reasonable would be to use the pullback motor introduced with some Shell promo Ferraris from several years ago, and integrate it into the Tiny Turbos size cars that get released sparingly. It's fairly slim, and wouldn't change the appearance much.
I'm still of the opinion that neither car should have been put in 'Speed Champions', but into a separate line; say: Screen Champions. I say this because: it 'muddies' the water. People/non-'fans' may not/won't recognize when TLG is licensing 'the car' or 'the I.P.'. Creating a separate 'theme' wouldn't completely stop the issue (re: "the Ferrari incident"), but it would certainty reduce it...just my thought/opinion, YMMV:)
@Feroz said:
"Adding K.I.T.T. and the A-Team van to line would be cool. The Dimensions versions were fun."
Would buy both of these, though I can't exactly picture the A-Team van as a "Speed Champion."
"Presumably the No Time to Die inspiration determined which version of James Bond is included too?"
I wish Brickset authors could learn how to pose more inquisitive questions so we can get more than just one somewhat new answer out of a multi-question interview. You so obviously gave them a spring board for them to just restate their usual recency bias and standard nebulous deflection pointing towards licensor demands which remain to be worded in a way that we will never find out if they even actually existed. Playmobil did a James Bond Aston Martin very recently and it came with 4 figures from an older movie, no Daniel Craig. Really makes me wonder if what Lego or its employees say is only true from a certain point of view and how much Playmobil or other brands "fight" for the exact opposite outcome.
I think in terms of scale, it was a good call to focus on appearance rather than function for the car. LEGO is flexible, but sometimes there's just not enough space at certain scales! I also don't really mind the choice of Bond. I think there are enough parts out there to swap around Craig's parts to represent the many other actors who played them!
In terms of appropriateness for what it is, I believe Speed Champions is the perfect place for us to get Bond in LEGO form. The line seems popular with adults, and kids would likely just think it's a cool spy with a cool car. Although, I still find LEGO is quite inconsistent with what it does and doesn't deem as appropriate. The Craig bond movies have been noticeably a lot more serious compared to the rest of 007's films.
I've also noticed the LEGO community going back to look at other Speed Champions sets. I'm seeing videos showing off all the neat details and models on the other cars. If the goal was to bring attention to the line, then mission accomplished!
Also, fun fact. Did you know TT Games wanted to make a LEGO James Bond game after LEGO Star Wars? Think the project got canned due to the franchise taking the aforementioned more serious direction. You can find test footage of some animations pretty easily.
Adding to the already mentioned KITT and the A-Team van, I'd love to see them do "The Blues Brothers" and "Smokey & The Bandit".
@sjr60 said:
"Interesting interview, although it would have been good to hear his thoughts on the use of such poorly colour matched stickers on the Aston... I'm sure he can't have been too impressed with those!
Still a great theme, and the only one I have complete (apart from the Mercedes Team gift set... I'm not completist enough to need half a retail set!)
Hoping for a Love Bug, a FAB 1, and a Monkeemobile!"
We addressed instances of poor colour matching in a previous article, albeit relating primarily to 76908 Lamborghini Countach on that occasion: https://brickset.com/article/73607
@Anonym said:
""Presumably the No Time to Die inspiration determined which version of James Bond is included too?"
I wish Brickset authors could learn how to pose more inquisitive questions so we can get more than just one somewhat new answer out of a multi-question interview. You so obviously gave them a spring board for them to just restate their usual recency bias and standard nebulous deflection pointing towards licensor demands which remain to be worded in a way that we will never find out if they even actually existed. Playmobil did a James Bond Aston Martin very recently and it came with 4 figures from an older movie, no Daniel Craig. Really makes me wonder if what Lego or its employees say is only true from a certain point of view and how much Playmobil or other brands "fight" for the exact opposite outcome. "
We have a good understanding of how to conduct designer interviews, thank you. LEGO was never likely to include several James Bond minifigures in a single-car Speed Champions set, having never done so before, so why would we waste a designer's time by asking multiple questions about it?
Also, I think what you describe as 'recency bias' is sensible decision-making. Chris mentioned that this set is intended for a broad audience, so including the actor from the recent movies seems reasonable. If this was an 18+ set intended primarily for adults, then I think deciding which actor, or actors, to include would become more contentious.
My question woulda been...
"Have there been any considerations changing the theme name to 'sticker champions' given the over-the-top amount of sticker?"
KITT seems like a great choice for this, its an iconic property that remains popular in 2022, it has nothing controversial that could lead to backlash against LEGO and it would sell to people who like the Trans-Am and want it for that reason.
I always enjoy Chris Stamp's interviews, he always comes across as incredibly dedicated and enthusiastic about Speed Champions, and it shows in the final products. Although not a car fan, these two (in particular the DB5), are an easy yes.
Interesting interview, I recently got the DB5 and love it. However, I really want to know if the spare nozzle that can double as a pistol, was unintentional on the part of LEGO.
Seems like these movie cars are just the beginning of a collection, which I’m pleased about.
Chris, if you’re reading this - Lotus Esprit with transformable underwater mode and Roger Moore minifig, please!
@RaiderOfTheLostBrick: Sets with that piece often include an extra, so there was probably no intended double use.
@RaiderOfTheLostBrick said:
"However, I really want to know if the spare nozzle that can double as a pistol, was unintentional on the part of LEGO."
I’d like to know that too! I feel like they knew what they were doing without overtly saying, ‘by the way here’s a gun’.
Great interview. The ideas for interesting vehicles from movies and TV are endless. I could even see revisits of things like the Mystery Machine from Scooby Doo or Hopper's Chevy Blazer from Stranger Things. The Back to the Future Time Machine redo would sell like hotcakes obviously.
Sometimes you feel like these fine-tuned small sets offer much more than some of those plain and expensive D2C ones...
@brick_r said:
"I'm still of the opinion that neither car should have been put in 'Speed Champions', but into a separate line; say: Screen Champions. I say this because: it 'muddies' the water. People/non-'fans' may not/won't recognize when TLG is licensing 'the car' or 'the I.P.'. Creating a separate 'theme' wouldn't completely stop the issue (re: "the Ferrari incident"), but it would certainty reduce it...just my thought/opinion, YMMV:) "
I disagree about muddying the line but I love the name "Screen Champions". You are a visionary!
@sjr60 said:
"Interesting interview, although it would have been good to hear his thoughts on the use of such poorly colour matched stickers on the Aston... I'm sure he can't have been too impressed with those!"
I have the DB5 and on my copy of the set, the stickers are a near-exact colour match. You almost can't tell they're stickers. So, the poorly printed stickers might be limited to the first production run, or to the shipment of sets they sent out to reviewers which may be pre-production units.
This is the folly of reviewing sets in the hype period so close to their release. There may still be bugs being ironed out (which happens with EVERY product, trust me) or hitherto unknown quality issues which wouldn't warrant a recall, and would be easily fixed once the manufacturer is aware.
I know some reviewers prefer to buy a shipped product in a store rather than relying on the manufacturer to supply them an example for free, and there are many reasons other than QC or impartiality to weigh up for them to choose to conduct their reviews in this way, but the key thing to remember is that you, the end user, will have to allow for these issues to be highlighted in a review that may not actually represent the item that you can buy in a shop, far removed from the conditions in which the review took place.
@pawelg said:
"Just look at the die cast Aston this guy is holding next to Lego version. Bricks version looks boxy, dull and cheap next to it. Sorry guys, but most of the cars simply do not translate good enough to bricks version. "
Your problem is trying to compare Lego to a die-cast model. Die-cast will always win the looks battle. Whatever you do, don't put a minifig next to a painting...you'll be disappointed.
@pawelg said:
" @DaBigE said:
" @pawelg said:
"Just look at the die cast Aston this guy is holding next to Lego version. Bricks version looks boxy, dull and cheap next to it. Sorry guys, but most of the cars simply do not translate good enough to bricks version. "
Your problem is trying to compare Lego to a die-cast model. Die-cast will always win the looks battle. Whatever you do, don't put a minifig next to a painting...you'll be disappointed."
How is that my problem? Maybe it's yours? I just compare one toy to another and express my opinion. Because they are just toys. For me whole Speed Champions theme has no sense at all. They try to mimic how the real world cars look which is not possible to do with boxy plastic bricks. You can't even open doors or a hood in those things. And it's not like you're going to reuse those very specific bricks to build anything else. Also good quality die-cast models are both cheaper and bigger than comparable Speed Champions models.
"
"Just toys" but yet they need to be just as real looking. Got it. By the way die-cast MODELS generally aren't toys. Good quality die-cast models are typically more expensive than Lego Speed Champions and msny of those don't feature moving/opening parts other than spinning wheels. Same can be said for true die-cast TOYS like Matchbox and Hot Wheels... at least not in their standard lineup.
The most iconic film car of all time is, of course, the DeLorean time machine. People will do the movie poster pose next to stock copies of the base car because it’s really all people know that car from. In terms of a whole franchise, I’d have to say that Pixar’s Cars might beat F&F for being known for cars, but there are only three films compared to nine, and the third entry was one of their worst films overall. Really, I’d like to see Andy’s mom’s vehicle from Toy Story, just because it’d be funny to see them make a Speed Champions minivan.
@Glacier_Phoenix:
They mentioned in a previous interview that the 2-packs are aimed more at father/son pairings, with the classic cars meant to appeal to dads, and the more modern ones chosen to appeal more to young boys.
@Modeltrainman:
I made a decent vintage amalgamation Beetle in 6-wide, but the slopes didn’t exist to get the rear window at the correct angle. Making Herbie would be further compounded by the need to add the red and blue racing stripes when they’d have to bisect two 1x2 rail plates. Even stickers or printing wouldn’t help there, plus the lack of any current movies makes this unlikely to be picked for the SC theme.
@Rare_White_Ape:
If they ever remake the Simpsons car, they better bite the bullet and make pink fenders to go with it instead of doing those horrible faceted things the first version used.
@jonwil:
I would like to voice opposition to the inclusion of Knight Rider on the basis of Hasselhoff’s terrible singing career.
@pawelg:
I’m sitting here, six days in to one of my LUG’s displays, and I’ve been getting lots of comments on my Pixar’s Cars cars, Pizza Planet trucks, and the flying Ford Anglia from Chamber of Secrets. Some of these have been displayed over 100 times. I have yet to hear a single comment about how they’re “too boxy” and that I should have just used die-cast models instead. Making LEGO models can be like going to the moon. We don’t chose to do it because it is easy, but because it is hard. Nobody gets impressed if all you do is build a large cube-like shape, and nobody really expects to see 100% accurate scale replicas if you’re using LEGO bricks as your medium.
Also, die-cast models often feature exaggerated curves because otherwise they wouldn’t read properly at such a small scale. This is also why Barbie has such impossible bust/waist/hips measurements, as it’s necessary to get the clothes to hang correctly.
Someone mentioned FAB 1! Yes please.
So much potential for F&F cars...
@PurpleDave
I thought the second one was the worst? "Cars" does James Bond NEVER should have gotten past the drawing board. The third one was an attempt at a return to form. (The lesson to be learned is: stay in your lane, Cars!)
@Murdoch17:
Cars 2 works very well…if you don’t go into it expecting a straight rehash of the first movie. I didn’t really like it on first viewing, but came to appreciate it quite a bit on second and further repeat viewings. I have not been able to find any love for Cars 3. Frankly, I’d rather watch The Good Dinosaur.
Speed Champions is easily my favourite Lego theme on the market currently. I remember watching an interview with Chris a few months ago and you can really feel his passion for the subject matter.
I also recall him suggesting fans send in ideas and custom MOCs though I couldn't find any way to contact him sadly. I imagine he's very busy but would love to share ideas and customs with him!
In case he does see this - more JDM (specifically Toyota) please! Would die for an RX7 or a Corolla and RAV-4 double pack.
I only buy 2-3 sets/year, but I've bought at least 1 Speed Champions set every year since they went to 8-wide. I'm not even a car guy, but I love the cars in Lego form. This is a great theme, and I'm only more excited about the possibilities we could get from all the TV & movie cars.
For the use of Bond, can you really tell its Craig? I mean, Bond can be any middle-aged white male with a tux. The only difference is hair style.
As far as my dream garage: A BTTF DeLorean with an actual windshield, F&F Honda Civic, Starsky and Hutch Torino, yellow Bug Bumblebee, Red Skull's 6 wheeled Benz, Porsche Panamera Gran Turismo and a Mercedes Gullwing.
If they do a Mercedes gullwing it had better be a 300 SLR Coupe!
@Jotahesse1:
In terms of James Bond minifigs, he’s the only distinctive one in that he has blond hair. The rest all have fairly similar hair in both style and color, plus the usual range of suits and tuxes. Only a few outfits through the series would really make the previous Bonds distinctive enough to identify, like his kimono from You Only Live Twice.
And one of these days I really should make a yellow Beetle, without a driver. Maybe see if there’s a way to add his face to the underside…
Request to Chris: Jurassic Park Explorer, PLEASE! Just straight lift the one from T-rex Breakout and mark it as EXP04 and bam, all you need for new product development's the box.
Maybe combine it with a customizable Jeep Wrangler that can be built as any of the three film versions? (Flattop/Toolbox JP10, Clothtop JP12, Rollbar JP18/JP29)
Amazing interview! Really digging into some things I question/consider as well when it comes to this line. These designers work with real passion, it's good to see this side from the table as well
A new sub-theme for Speed Champions I'd love to see is emergency vehicles, I know the likelihood is low but one can dream.