Review: ReefScape Lionfish

Posted by ,

Last month, we mentioned that British company Tropical Marine Centre has produced a range of fifteen custom LEGO models of tropical fish, in conjunction with Bright Bricks.

They are now widely available from Maidenhead Aquatics both in-store and online in the UK and are also now being stocked by Chowren Toys, who can ship them to countries outside of Europe.

Just before I went away, Paul from TMC kindly arranged for one of the larger models, the Lionfish, to be sent to me for review. I've just finished building it and I have to say, I'm impressed, so much so that I hot-footed it down to my local MA branch this morning to buy another in the series.

Box and contents

They come packaged in large glossy boxes which have both shrink-wrapping and plastic seals. The initial impression is of a high-quality product.

Reefscape Lionfish kit

The back shows the current selection of 15 models along with the LCP logo in the corner which is the only place the LEGO logo appears. The side of the box has various disclaimers on it including how it's not endorsed by the LEGO group and that they are not interested in any problems you might have with it. Presumably this is a requirement for sets produced by LCPs.

Reefscape Lionfish kit

Inside the box is a large zip-lock bag of parts, a printed instruction manual and a fold-out poster.

Reefscape Lionfish kit

Clearly a single pile of all 619-pieces would make it difficult to find parts while building, so I sorted them into plates, slopes, bricks and everything else. The bulk of the parts are, as you can see, white and dark red 1xn plates.

Reefscape Lionfish kit

The instructions are printed on high-quality paper stock. The A5-sized 56-page manual contains clear and concise instructions for the fish with each step showing the parts to be added.

Reefscape Lionfish kit

The build

The base is made first and it's perhaps the fiddliest part of the build, particularly if you want to place every 1x1 plate exactly where shown. There's no real need to do that, of course.

The 2x4 'ReefScape' white brick is printed, by Minifigforlife, I suspect.

Reefscape Lionfish kit

The instructions for the fish are easy to follow and the approach taken to the build, which is basically to start at the tail and work upwards linearly layer by layer, works well enough although I felt sub-assemblies could have been used to advantage when adding the spines: it was fiddly to build them while they were attached to the animal's body.

There was one minor mistake in the instructions but nothing that would cause confusion.

The body is made almost entirely of plates, with a few slopes here and there to give it the correct shape. Thus it's a fairy straightforward build although you'll benefit from having a good bright light to view the instructions under because the black borders of the dark red plates were sometimes difficult to make out.

The finished model is very impressive indeed. I'm no fish expert but it appears to be a good representation of the real thing.

Reefscape Lionfish kit

The wings/fins/tentacles/whatever on the side can be moved up and down individually and also folded close to the body.

Reefscape Lionfish kit

An 'illegal move' has been used for the eyes which are the base of levers.

Reefscape Lionfish kit

Reefscape Lionfish kit

Six 2x2 trans-clear round bricks are provided to mount the fish on the base although I felt that wasn't quite enough to keep it from touching the reef so I added a few more.

Reefscape Lionfish kit

Verdict

This is a high-quality kit with good attention to detail to the packaging, the instructions and most importantly, the parts. I had none missing and a few small plates left over.

Building it was very enjoyable and unlike making official models: no concessions have been made to make it easy by adding odd-coloured bricks inside it, by restricting the number of different parts or colour-keying certain parts, so it could be quite a challenge to those used only to official kits.

The finished model is very attractive and, at about 25 x 14 x 19cm, impressive in size. It's something that every tropical fish loving LEGO fan will love to build, to own and to admire.

The only sticking point is the price. At a penny under £100 this is not a cheap kit or a cost-effective way to buy parts, given they work out at about 38p each. It's not something the cash-strapped LEGO fan should even consider buying. Instead, head to the ReefScape website and download the inventory and instructions and build them from your own parts.

But, for those that have everything, one of these kits would make the perfect Christmas gift, and for the tropical-fish-loving money-is-no-object LEGO fan they are a match made in heaven.

As I said above, after building the lionfish I went to my local Maidenhead Aquatics to see what they had in stock. Most of them, as you can see from the picture below. I bought the clown fish pair (£60) because the cashier told me they were 'flying off the shelves' :-)

Reefscape display

ReefScape Clown fish

ReefScape Clown fish

The clown fish set contains some rare parts: the 1x1 round plates with hole in yellow, 1x1 orange plate clips and the red tails.

If the price hasn't put you off you can buy them now from Maidenhead Aquatics in-store and online in the UK and from Chowren Toys if you are outside of Europe (their agreement prevents them from selling them to Europe).

I understand that Duncan from Bright Bricks is going to add a tropical fish project to LEGO Ideas. I guess it could follow the success of Birds; let's hope so!

11 comments on this article

Gravatar
By in United States,

I would really love to get a shark in this scale. They don't have to make it a Regular shark ; the whale shark is eye catching in my opinion , and it's not something we normally see in Lego.

Also , the lion fish has spines , that's what all those long things off of it are.
While this is a lovely set , it's entirely too expensive for me. Perhaps I may decide to source parts and build it , but as it is , this is in the range of 'this or UCS slave one'.

Gravatar
By in Taiwan,

Thanks Huw for the fabulous review and posting the link to our website. Chowrentoys is the exclusive online retailer for ReefScape in the US and are authorized to resell outside of Europe. I know these custom sets are quite expensive this is why we have them marked them down by 25% for the holidays. Please keep in mind these are limited edition with only 600 produced and sold world wide. Even if you don’t buy one they are still quite stunning to look at. It might be worth you while like Huw said to download the parts list and try to build one yourself.

Gravatar
By in United States,

SHEER AWESOMENESS. If I had the parts I'd build one from the online instructions. How much would these cost in the US?

Gravatar
By in United States,

These look very cool! I may build one myself, but I don't think a kit is in the budget.

Gravatar
By in United Kingdom,

^^ Follow the link to Chowren Toys and find out...

Gravatar
By in United Kingdom,

Yes Huw, We did the printing for the 2x4 Reefscape brick.
The kits look excellent.

Gravatar
By in Belgium,

Waw, that's stunning, thanks for the review.

Gravatar
By in United Kingdom,

Glad you like it!
sorry for any confusion in the instructions :)

Gravatar
By in United States,

I love this set as much as I love this animal in real life (when it is on Australian waters and not invading the Carribeam).

Gravatar
By in Taiwan,

These are just gorgeous. I scuba dive and see several of these fish up close and these models really do them justice. So glad they have the instructions available.

Return to home page »