Review: 75222 Betrayal at Cloud City

Posted by ,
View image at flickr

Cloud City plays an enormous role in Star Wars Episode V: The Empire Strikes Back but has only appeared in two previous LEGO Star Wars sets, disappointing many fans. Rumours surrounding the release of a new model which is based upon this important location were therefore met with great excitement and considerable speculation.

However, the announcement of 75222 Betrayal at Cloud City caused some division. This set is clearly focused upon play, taking inspiration from 10188 Death Star and 75159 Death Star, so might not appeal to older LEGO Star Wars collectors who were looking for an impressive display model. Nevertheless, I believe this set has a great deal of potential so have been looking forward to building it.

Box and Contents

I like the Ultimate Collector Series branding that was introduced last year so am pleased to see it again here, applied to a Master Builder Series set on this occasion. The black packaging design looks great and the billowing clouds of Bespin create an attractive backdrop. However, the model is displayed from an unusual angle which is not particularly appealing in my opinion, although it does show almost every area of the set.

View image at flickr

The box contains 26 bags, numbered from one to thirteen, along with a single instruction manual and two sticker sheets. Some of the bags are packaged in a smaller white box which is decorated with a quotation from Star Wars Episode V: The Empire Strikes Back, reading "I've just made a deal that'll keep the Empire out of here forever".

View image at flickr

Designer interviews have become a consistent feature of larger Star Wars sets and 75222 Betrayal at Cloud City is no exception. The first several pages of the instruction manual are focused upon the set designer, Hans Burkhard Schlömer, as well as Madison O'Neil who created the graphics. In addition, there is some information about Cloud City in the movie along with a few concept illustrations.

View image at flickr

Minifigures

This set contains an impressive selection of minifigures, the first of whom is Luke Skywalker. The young Jedi wears a dark tan uniform while attempting to rescue his friends from Cloud City and this minifigure looks fantastic, featuring a couple of intricately detailed pockets on the torso and two more on his legs. These designs match the source material exactly and I like the reddish brown belt too.

75222 Betrayal at Cloud City

I think tan might have been a more appropriate colour for Luke's attire than dark tan, although the latter shade presents a contrast with his skin tone. The head features a determined grimace on one side and the alternative expression appears devastated, presumably in response to Darth Vader's delivery of a shocking truth! The minifigure is equipped with both a blaster pistol and a blue lightsaber.

75222 Betrayal at Cloud City

Two different versions of Han Solo are included. One is based upon the character's appearance when he arrives at Cloud City while the other wears a wrinkled shirt, in preparation for carbon-freezing. Both minifigures feature the same textured hair piece which looks brilliant and their facial expressions are excellent, accurately capturing the smuggler's confident personality.

View image at flickr

The minifigure wearing a white shirt previously appeared in 75174 Desert Skiff Escape and the design on the front of its torso is lovely. However, there is no printing on the back which is unusual and I think that should have been updated here. The jacketed figure looks fantastic though, sharing its torso with the Han Solo minifigure in 75192 Millennium Falcon but including a brand new pair of dual-moulded legs!

View image at flickr

Dual-moulded arms and legs have been available for several years but have not appeared in the Star Wars theme, until now. Han's black boots look wonderful but I am even more impressed by the yellow Corellian blood stripes which are printed along the side of each leg. A holster is included too and this lines up exactly with the straps on the front of the legs, as demonstrated in the image below.

75222 Betrayal at Cloud City

Furthermore, the set also includes Han Solo in Carbonite. This pearl dark grey element was created for 8097 Slave I in 2010, at which time Han Solo featured a different hair piece. It is disappointing that the hair on the carbonite block has not been updated to match Han's new hair piece, particularly given the exceptional printed detail surrounding the minifigure and the lovely texture of the frozen carbonite.

75222 Betrayal at Cloud City

Chewbacca first appeared in 7190 Millennium Falcon and an almost identical minifigure remained in use until 2014, when the character was redesigned. This version features dark brown fur with medium dark flesh highlights so is accurate to the source material but there should perhaps be some additional medium dark flesh hair around the Wookiee's midriff. The metallic silver bandolier looks superb though.

75222 Betrayal at Cloud City

Further printed detail highlights Chewbacca's white teeth and his shiny nose. The minifigure is armed with a stud-shooting bowcaster but does not include a satchel for carrying C-3PO which is somewhat disappointing. However, that would certainly have required the creation of a new component with few alternative uses so its omission is not entirely surprising.

75222 Betrayal at Cloud City

This set also comes with two Leia Organa minifigures, the first of which wears a white padded jacket for her arrival on Cloud City. I love the diagonal striped pattern on both sides of the jacket and a small command insignia is attached below the collar which looks splendid. However, I would have preferred to see a different version of the character without her jacket as that attire appears more prominently on Cloud City in the film.

View image at flickr

The second minifigure is dressed in an impressive gown which features a delightful circular pattern. This design looks absolutely magnificent and continues onto the back of the dress, along with some subtle tan highlights. However, the dark brown hair piece bears little resemblance to Leia's formal hair style in the movie so a new element should definitely have been introduced here.

LEGO has produced several different versions of C-3PO and the latest rendition is certainly the most detailed. I love the colourful powerbus cables which are visible between his golden chest panels and the printed designs on the legs look marvellous too, although a dual-moulded right leg would have been even better as the lower half of Threepio's leg should be silver rather than gold.

75222 Betrayal at Cloud City

A unique head was created for protocol droid minifigures in 2000 and that component remains in use today. There is no need for an update though and the element continues to impress, despite its age. Both eyes are decorated with yellow highlights and there is some lovely moulded detail around the mouth.

75222 Betrayal at Cloud City

R2-D2 was updated quite significantly in 2014 and has remained almost unchanged since then. The droid's pearl silver dome looks superb, featuring a pink processor state indicator and some dark blue panels, while his cylindrical body is decorated with a few metallic silver highlights. I would love to see corresponding panels on the pack of the figure but am quite satisfied with the existing design as well.

View image at flickr

Of the twenty minifigures in this set, Lando Calrissian is definitely my favourite. His luxurious attire as the Baron Administrator of Cloud City is rendered with magnificent detail and represents a tremendous improvement over the figure from 10123 Cloud City, as one would expect. The black hair piece is ideal for this minifigure and two different smiles are printed on the head, perfectly capturing the character's charming personality.

75222 Betrayal at Cloud City

Lando wears an impressive cape in Star Wars Episode V: The Empire Strikes Back and that has been replicated with incredible detail here. Not only does the cape include two colours but its interior surface is decorated with a floral design which matches the source material exactly. Its length is not completely accurate though as the cape does not extend to the floor in the movie, although I think a shorter design would look out of place on this minifigure.

75222 Betrayal at Cloud City

Removing the cape reveals a few creases in Lando's medium azure shirt and these continue onto the front of his torso where you will also find a simple belt. LEGO has produced more than 1000 different Star Wars minifigures since 1999, most of which are excellent. However, I think this Lando Calrissian figure deserves to be considered among the best of them!

75222 Betrayal at Cloud City

Lobot has only appeared in a couple of previous sets and this minifigure is very similar to that from 9678 Twin-Pod Cloud Car & Bespin. His light bluish grey attire is relatively simple but compares favourably with The Empire Strikes Back, featuring white sleeves as well as some printed creasing which looks very realistic.

75222 Betrayal at Cloud City

I like the character's severe facial expression but was surprised to find that his cybernetic implant is printed on the sides and back of the head, rather than being an entirely separate element. The press release for this set gave the impression that Lobot would come with a new cybernetic band, although the existing printed design is adequate in my opinion.

75222 Betrayal at Cloud City

A small group of Cloud City Guards maintain security across the mining colony and this set contains two such characters. They are dressed in blue uniforms with a metallic gold trim which looks suitably regal and I like their hats as well. However, the very first Bespin Guard minifigure included printing around its wrists and I was hoping that be reintroduced for 75222 Betrayal at Cloud City.

View image at flickr

I was somewhat surprised that both minifigures feature a flesh skin tone as the most prominent guard in the movie, named Isdam Edian in Legends continuity, is a black character. These heads look good though and each guardsman is armed with a light bluish grey blaster, represented by a hose nozzle rather than a standard blaster pistol.

View image at flickr

Furthermore, the set includes two Cloud Car Pilots. These characters only appear in the background of The Empire Strikes Back so there is no direct source for comparison, although but numerous action figures have been released and the minifigures compare favourably with their larger counterparts. The white uniform feels appropriate for Cloud City and I like the red emblem printed on their left breast.

View image at flickr

However, the most interesting aspect of these pilots is their helmet. This element was originally created for a Rebel Alliance soldier in 75155 Rebel U-wing Fighter but it closely resembles the helmets worn by Cloud Car Pilots so works perfectly on these minifigures. The red decoration looks good and I like the double-sided heads which feature stern and worried expressions along with an orange-tinted visor.

View image at flickr

75137 Carbon-Freezing Chamber was the first set to include an Ugnaught but this minifigure is unique, wearing a light bluish grey shirt rather than an apron. Such variation is always welcome but I think an additional Ugnaught should have been included, particularly given the inclusion of a waste disposal room where several Ugnaught try to keep C-3PO's head away from Chewbacca.

75222 Betrayal at Cloud City

This minifigure's head sculpt is shared with the Ugnaught from 2016 but the printed designs have been updated to include more facial hair than its predecessor. I think it looks alright when compared with the Ugnaughts from the film, although even more facial hair would have been welcome. The figure carries a black spanner.

75222 Betrayal at Cloud City

Darth Vader wears an intimidating helmet which includes tremendous moulded detail and consists of two components. A smaller element fits around the Sith Lord's neck and is left behind when the upper section is removed, revealing the scarred face of Anakin Skywalker underneath. I am pleased that the minifigure designer has returned to using this white head rather than the tan piece from 5005276 Star Wars Anniversary Pod.

75222 Betrayal at Cloud City

The front of the torso is decorated with some colourful buttons on the life-systems computer and a metallic silver belt buckle but the reverse is completely plain. Fortunately, this is concealed by a soft fabric cape which fits around the minifigure's neck and matches the printed robes very nicely. Naturally, Darth Vader is armed with a red lightsaber.

75222 Betrayal at Cloud City

Different renditions of Boba Fett have always been at the forefront of minifigure design, most notably in 10123 Cloud City where the figure included printed arms and legs. This example is almost identical to that from 75060 Slave I and looks fantastic so I am glad that it has not been updated unnecessarily, with the only change being the addition of a standard Clone Trooper head underneath the helmet.

75222 Betrayal at Cloud City

A series of yellow stripes are printed on the side of the helmet, along with some metallic silver battle damage. Similar highlights cover the chest armour and both of Boba Fett's kneepads, matching the appearance of the bounty hunter in The Empire Strikes Back exactly. His sand green jetpack and printed cape look brilliant too.

75222 Betrayal at Cloud City

However, my favourite aspect of this minifigure is undoubtedly the printing on its arms. The right arm includes a flamethrower while the left features a rocket launcher. Both arms are also decorated with flame yellowish orange shoulder armour and the back of the torso is equally detailed, despite being covered by a jetpack. Boba Fett is armed with an EE-3 blaster rifle, represented by a blaster pistol with a black lightsaber hilt at the end of the barrel.

75222 Betrayal at Cloud City

IG-88 follows Boba Fett to Bespin where the droid is quickly destroyed by its bounty hunting rival. The remains of this bounty hunter appear briefly as Chewbacca attempts to rescue C-3PO so I am glad to see him here. This figure includes the same printed eyes as that from 75167 Bounty Hunter Speeder Bike Battle Pack and they look superb, as indeed does the blaster rifle fitted to the droid's back.

75222 Betrayal at Cloud City

A pair of Stormtroopers complete this set. The shape of their helmets has remained the same since 2001 but the printed designs have been updated on several occasions, most recently in 2014. I love the dark blue vents on either side of these helmets and the printed mouth grille looks superb. Clone Trooper heads are found beneath the helmets which is disappointing, although they are rarely seen.

View image at flickr

The armour on their torso and legs is also very impressive. I am particularly satisfied with the shading around their abdomen as that looks remarkably realistic, although the knee protectors end abruptly so that area of the figure could be improved. As usual, both Stormtroopers are equipped with a standard blaster rifle.

View image at flickr

The Completed Model

75222 Betrayal at Cloud City takes inspiration from the design of 10188 Death Star and 75159 Death Star, featuring several prominent locations from Star Wars Episode V: The Empire Strikes Back which are combined to resemble the exterior of Cloud City. The model measures 54cm in diameter, although this does vary as it is not a perfect circle, so is larger than I was anticipating and it is remarkably sturdy given its enormous size.

View image at flickr

The set includes ten different rooms as well as two external platforms and the sensor balcony where Luke Skywalker and Darth Vader conclude their lightsaber duel. These areas are cleverly arranged to reflect the sequence of events in the movie and their relative sizes are appropriate too, providing plenty of space to play with the minifigures inside without compromising on the level of detail.

View image at flickr

A circular landing platform occupies one quadrant of Cloud City. This structure is quite simple but I like its shape and the trans-yellow landing lights around the edge look superb, as indeed does the contrast between tan and dark tan plates. Exposed studs cover the whole landing platform and these might not appeal to everyone so a few tiles would probably have been welcome here, although the studs do not actually bother me.

View image at flickr

However, the landing platform looks even better when the Slave I is placed on top, as demonstrated below. Boba Fett's vehicle fits onto the platform perfectly and provides a welcome splash of colour to the model. The craft measures 19cm in length so is considerably smaller than minifigure scale but you can still place Boba Fett inside the cockpit, just as you would on a larger rendition of the Slave I.

View image at flickr

Hans Burkhard Schlömer, the designer of this set, also created 75060 Slave I for the Ultimate Collector Series so it should come as no surprise that this an excellent model, despite its small size. The curved shapes have been replicated effectively and the balance between light bluish grey, dark red and sand green components is faithful to the movie.

View image at flickr

The wings are fitted to a Technic axle so will rotate as the Slave I moves between flight and landing modes. This works reasonably well and I like the yellow highlights on the wings, although there is no stopper which prevents them from rotating all the way around when the vehicle is inverted. In addition, two stud shooters are mounted on either side of the fuselage and they are incorporated neatly so avoid detracting from the model's appearance.

View image at flickr

Boba Fett fits comfortably inside the cockpit, leaving just enough room for the canopy to close around him. There are no controls in front of the pilot but I believe that would be an unrealistic expectation for such a small model. Nevertheless, a couple of mechanical details are visible behind Boba Fett and no unsightly Technic elements remain exposed once construction is complete.

View image at flickr

Similar detail continues on the underside of the vehicle where you can see a row of five small thrusters alongside two larger ones. These are accurately arranged and the sensor dish, which is also shown to be a docking port during Star Wars: The Clone Wars, looks brilliant. Unfortunately, the cavity beneath the engines is far less attractive and reveals part of the internal structure.

View image at flickr

This is intended for storing Han Solo in Carbonite, allowing Fett to transport the stricken smuggler to Jabba's Palace on Tatooine. I am impressed that the designer found space for this carbonite block in such a small model and the Slave I can still land without obstruction as the block fits entirely within its storage compartment. Furthermore, you can place Boba Fett's blaster rifle on a single clip at the top of the boarding ramp which is useful.

View image at flickr

A short walkway connects the landing platform to a sliding door. The tan external wall looks marvellous when compared with the source material, featuring a series of light fixtures and some white decorative moulding around the doorway. The dark orange door at the centre really stands out, due in part to its distinctive colour scheme but also to the interesting grille texture. Oddly, this door opens horizontally rather than vertically so contrasts with the movie.

View image at flickr

White walls dominate the public areas of Cloud City and that colour scheme is prevalent throughout the entrance hall. The sculpture at the centre of this space looks fantastic and I love the relief mural on the wall which makes clever use of some 1x1 quarter circle tiles. Several stickers are used in here as well, representing two computer terminals, one of which may actually be a power socket! This is somewhat disappointing as brick-built designs would have been adequate, even if they did not capture absolutely every detail from the film.

View image at flickr

The blue and white murals beside the door, on the other hand, look tremendous. These stickers are applied to white panels and cover part of the tan exterior wall, although the opposite side of the door remains exposed which is a shame. The tan walls that surround the dining room also look somewhat awkward in my opinion and I think an additional layer of white bricks should have been added, even if that reduced the available floor space.

View image at flickr

Three separate rooms are accessible from the entrance hall, the first of which is a maintenance area where C-3PO encounters a squad of Stormtroopers. We only see a small part of this chamber in the movie but I like the pipework on the wall and the Stormtroopers' seats are a charming inclusion. You can store their weapons by plugging them into the dark bluish grey jumper plates on the floor.

View image at flickr

Each room is accessed through a sliding door which opens upwards and is held in place by a Technic pin. This is a simple function but it works well and only occupies a small space. The numerous sliding doors in 10188 Death Star were always among my favourite features and I am sure that these doors will prove equally popular with children today.

View image at flickr

Han and Leia reside in a luxurious apartment while waiting for the Millennium Falcon to be repaired. This is dominated by an impressive trans-clear sculpture at the centre of the room and there are two chairs around the sculpture which look ideal for Han and Leia, although there should actually be a few more seats. The curved tables could also be improved as they are light bluish grey here but transparent in The Empire Strikes Back.

View image at flickr

Several more large stickers are placed on the walls inside the apartment. Unfortunately, not all of these stickers feel necessary, much like those in the entrance hall. Nevertheless, the plant in the corner of the room looks good and I like the alternating textured 1x2 bricks which form the doors, faithfully replicating Cloud City's onscreen appearance.

View image at flickr

The irregular shape of the dining room is accurate to the source material but does not make efficient use of the available space, leaving several empty studs outside. The tan walls look marvellous though and I like the stickers that depict relief murals. Five chairs surround the dining table at the centre of the chamber which is perfect for the minifigures in this set, although there are seven seats in the film.

View image at flickr

Pearl silver harpoons form an ornate light fixture on the wall, demonstrating excellent attention to detail on the part of the set designer. However, I am even more impressed by the miniature Cloud City which is on display in the corner of the dining room! This makes ingenious use of a light bluish grey hat from NINJAGO and looks splendid.

View image at flickr

A small balcony extends from one side of the dining room, providing somewhere for Boba Fett to wait before emerging beside Darth Vader. While I am glad that this little platform is included, I would rather the shape of the dining room had been altered to create space for Boba Fett. The round windows look superb though, incorporating some 1x3x2 inverted bows which have only appeared in tan once before.

View image at flickr

Cloud City becomes considerably darker as you move away from the public promenade and approach its industrial zone. This dark red corridor provides a smooth transition between two different sections of the model and includes a sticker on the wall, depicting the exterior of a turbolift. Of course, this lift does not actually work as there are no additional levels to reach.

View image at flickr

The dark red walls surrounding the detention area feature an interesting ribbed texture that consists of 1x2 tiles and 1x6 tiles. I like the blue lamp on the wall and the stickered control panel beside the sliding door is a wonderful detail. In addition, the corridor is quite spacious so there is plenty of room for Lando Calrissian, Boba Fett and a couple of Stormtroopers to stand here, listening to Han Solo's screams!

View image at flickr

Opening the door reveals a torture device, a prison cell and a folding bed where Han Solo can recover. These were situated in two separate rooms in the movie but I think combining them was quite sensible. I am particularly impressed by the tiny cell in the corner of the torture chamber but the dark bluish grey areas of the wall appear out of place.

View image at flickr

The torture device at the centre of the room, which was revealed to be a piece of mining equipment in Star Wars Legends, looks suitably intimidating. There is space to place a minifigure on the torture rack and fold it forwards, bringing the sparking analysis probes nearer to their unfortunate victim. Two clips on the wall provide storage for accessories and you can also fit a minifigure on the black bed towards the back of the room.

View image at flickr

A waste disposal chamber is situated on the other side of the corridor. This contains a furnace and a conveyor belt where Chewbacca discovers C-3PO's remains. I like how light bluish grey Technic pins form rollers on top of the conveyor but wish it was slightly longer. The furnace looks great though and there is another round window in the corner which matches the source material almost exactly.

View image at flickr

Another landing platform adjoins the detention area corridor. This light bluish grey structure feels more industrial than its circular counterpart, featuring a small tool rack and two clips for storing the Cloud Car Pilots' blaster pistols in the corners of the room. I think a single platform would have been adequate but open spaces are always welcome for play and this chamber could fulfil many different roles, depending upon the situation.

View image at flickr

However, it is primarily intended for landing the Twin-Pod Cloud Car and works well in that capacity. The trans-yellow lights along the edge of the platform look quite realistic and there is lots of room for minifigures to stand around the Cloud Car, should it require maintenance. Even so, I think the size of this hangar could have been reduced in favour of other areas.

View image at flickr

Sixteen years have passed since 7119 Twin-Pod Cloud Car was released so an updated rendition is long overdue in my opinion. The organic shape of this elegant vehicle has been captured with greater precision on this occasion but its red colour scheme remains. This is very disappointing as dark orange would have been a more suitable colour. Unfortunately, several of these pieces are not available in dark orange, in which case I think red is a reasonable alternative.

View image at flickr

A few orange and dark bluish grey parts are sprinkled across the model, adding a welcome splash of colour which helps to break up its red silhouette. The shape of the fuselage is accurate on the whole, although the connecting boom which links the cockpits should be slightly narrower. Presumably this was altered to strengthen the Cloud Car and that was definitely successful as the model feels very sturdy.

View image at flickr

The twin cockpits are extremely cramped but there is just enough room to squeeze a pilot in each one, although their enormous helmets do make this rather difficult. The sides of the cockpits are fitted using click hinges so they fold down, revealing four studs where the figure can sit as well as a printed control panel. More spacious cockpits would have been ideal, of course, but I am impressed that the designer found any room for minifigures as the Cloud Car is a small craft.

View image at flickr

A trans-light blue 1x4 tile forms the engine at the rear of the Cloud Car. I like the red 1x2 grille tiles on top and the light bluish grey air intake on the front looks fantastic too. Two stud shooters are situated underneath the central stanchion and these are incorporated neatly, providing some extra play value but not spoiling the appearance of the model.

View image at flickr

I noticed a flap on the Cloud Car landing platform when official images of this set were published and assumed that this concealed a storage compartment. In fact, a short ladder is hidden underneath the floor. This does not take direct inspiration from anything in Star Wars Episode V: The Empire Strikes Back but could offer some interesting opportunities for play as there is quite a lot of room below the floor level.

View image at flickr

The famous carbon-freezing chamber is accessed through another narrow corridor. This is decorated with mechanical details on the walls and resembles one of the hallways where Luke and Darth Vader fought their lightsaber duel. I love the trans-neon orange grille tiles on the steps but the wall appears rather plain and I think some simple pipework would have improved this area of the model.

View image at flickr

10123 Cloud City included a fairly rudimentary rendition of the carbon-freezing chamber and that was followed by 75137 Carbon-Freezing Chamber in 2016 which improved upon its predecessor. However, the latest model is definitely the most faithful to the movie, featuring a twelve-sided platform with some trans-neon orange lights in the floor. I like the printed control panel near the stairs and there is lots of space for minifigures to stand around the chamber.
View image at flickr

View image at flickr

The entire platform is elevated on four dark brown columns so looks as though it might be quite fragile. In fact, these columns are surprisingly rigid. Pulling the lever on the left of the structure will cause Han Solo to be lowered into the carbon-freezing chamber while Han Solo in Carbonite is pushed upwards, replacing the minifigure! This is a fun feature but it does not work quite as smoothly as I was hoping. Even so, the carbon-freezing chamber is among my favourite areas in this whole set.
View image at flickr

View image at flickr

Darth Vader lures Luke Skywalker into the carbon-freezing chamber at the beginning of their lightsaber duel and this continues into a control room before moving to a precarious atmospheric sensor balcony. The sensor balcony has only appeared once before, in 10123 Cloud City, but this rendition of the vital location is far larger and more detailed than its predecessor, measuring almost 29cm in length.

View image at flickr

The control room is smaller than would be ideal, providing only just enough space for Luke and Darth Vader to stand inside. I think this should have been expanded to occupy part of the Cloud Car landing platform. Nevertheless, the control room is easily accessible for play and a piece of machinery can be detached from the wall, recreating the scene in which Darth Vader hurls objects at his opponent using the Force.

View image at flickr

One of these objects smashes through a radial window in the control room, causing Luke to fall onto a narrow balcony below. The gap between the window and the balcony has been reduced on this model but it still captures the essence of the source material. Moreover, you can also swing this entire section outwards, thereby creating more space on either side of the sensor balcony.

View image at flickr

Flexible tubes form the railings around the sensor balcony which is reasonably effective, although they are only attached to thin droid arms which provide little support. The atmospheric sensors at the end of the balcony look marvellous though, making ingenious use of a light bluish grey pitchfork along with two pearl silver foils. Unfortunately, there is only a single hand grip for minifigures so the display options are limited and the antenna cluster tends to rotate as the pitchfork at its core provides very little friction.

View image at flickr

Cloud City is primarily focused upon industry but also includes a luxurious leisure complex at its centre. A group of tiny towers therefore extend from the centre of this model, depicting the upper levels of the mining facility which appear most prominently in the film. These towers make clever use of some light bluish grey microphone accessories and ice cream cones, creating a wonderful little metropolis!

View image at flickr

Overall

10188 Death Star was among my favourite sets as a child and I believe 75222 Betrayal at Cloud City will occupy a similar place in the collection of many younger Star Wars fans. The arrangement of the rooms works perfectly and I appreciate the smooth transitions between different areas of the model. Furthermore, this set includes two excellent vehicles and the minifigure selection is tremendous.

View image at flickr

However, there is significant room for improvement. The area around the dining room has not been used to its fullest potential in my opinion and certain sections of the model should have been expanded, perhaps replacing the Cloud Car landing platform. In addition, the price of £299.99 or $349.99 seems quite expensive for a set containing 2812 pieces, although its size is undoubtedly impressive.

On that basis, I would primarily recommend this set to younger LEGO Star Wars fans. The model provides little display value so I can appreciate the disappointment of adult collectors, although the Master Builder Series is focused upon play and I think 75222 Betrayal at Cloud City succeeds in that capacity. I will be interested to see what the new Master Builder Series offers in the future.View image at flickr

I hope you have found this review informative. Let us know by liking this article and share your thoughts on the set in the comments below.

This set was provided for review by The LEGO Group but the review is an expression of my own opinions.

 

Sponsored content

48 comments on this article

Gravatar
By in United Kingdom,

Can't wait to get this. Mainly for the figs mind you. Also going to have fun dusting it too lol.

Gravatar
By in United Kingdom,

You were a child when 10188 came out? I thought you were older, Cap'n :p

I like this set close up, but not as a whole. It has a lot of really nice little details mashed together into one incoherent mess. Also possibly wins the prize for the worst box art ever.

I wonder if we'll see more dual-moulding on Star Wars figs... there are so many that would benefit from it. Scout Troopers spring to mind.

Gravatar
By in Romania,

Why wasn't this a modular huge playset ?
Separate every room in small 15 - 20 -30 dollar sets and then just mix them together.
Everybody would have loved something like that.

Kids for playing and customize the connections.
Collectors just buy the rooms they want in multiple packs to make the rooms more accurate to the movies.
And also people can buy just for the minifigs if they wanted.

I want parts of this set but I will not buy the whole set. I want most of the minifigs but I will still not buy it and I would have liked to buy multiples like I did for carbon chamber set to make it more accurate but I will still not buy this set.

Such a disappointment for me

Thank you for the detailed review :)

Gravatar
By in United Kingdom,

It seems strange to me that they'd move away from the display models of the UCS and not double down on play features and the like. A lot of this looks quite bare, which doesn't feel like the best decision for the figurehead model of the Master Builder series. It's not very good for display and also could be a lot better as a playset. Hopefully in the future this series will have slightly fuller models.

Excellent review, though, Cap

Gravatar
By in Belgium,

I'm gonna buy this set. I see room for improvement, like the playability, the minifigs. And i like to swoosh with my LEGO build Star Wars ships

Gravatar
By in United States,

This review highlights what I decided I love about this set from the prerelease images, and what I don't like about it. Doesn't look good on display... Recreates a lot of scenes in play style from a favorite movie... Unfinished rooms... lots of iconic locations... Its a mixed bag for me to be honest, having such love-hate reactions to almost everything in this set. Honestly speaking, I think for large playsets the two Death Star variants and the Ewok Village take the cake right now; but I do hope Cloud City's best aspects is a sign of future things to come... If this Master Builder line continues and improves I hope it leads to play style renditions of the Cantina, Jedi Temple, Starkiller Baset, etc; but with a little bit more display-ability than Cloud City has right now.

Also, here is hoping that Han Solo ends up in a cheaper set someday soon! Those legs are amazing.

Gravatar
By in United States,

Love this, especially the mini Slave 1. Although they do need to update the carbonite brick, it’s still cool

Gravatar
By in United States,

This review kinda confirms what I suspected from the start - this set is trying to be a lot of things to a lot of different people, and as a result it just ends up falling *slightly* short in a number of different areas.

It doesn't seem bad by any means, it just seems LACKING. Which is a bad feeling to have about such a large and expensive set. I like the idea another commenter had of doing Cloud City modular sets. There's so much to work with!

- Luke and Vader's duel - that's a set
- Landing platform with Slave I and maybe some Cloud City hallway - that's a set
- Cloud City junk heap - small set
- Cloud City dining room and torture chamber - small set
- Cloud Car - A set! A proper set, done in dark orange

Maybe it's riskier for TLG to release an entire season's worth of set around one movie - I am not sure. But it just seems like an "a la carte" version of Cloud City would have been a bigger hit with adults AND kids. Hell, a $60-80 Luke-Vader duel set alone seems like it would sell like hotcakes.

Gravatar
By in United Kingdom,

Thank you for the Review, it shows bits you can't see from the Official pics. I am going to get it at some point..... but have you just recommended a £300 set to younger fans....... that's over a years worth of pocket money surely. I'm going to struggle and I've got a Job and everything........ :-)

Gravatar
By in Norway,

Great review! Can you take a photo of the set in profile as well? Very curious as to how that looks.

Gravatar
By in United States,

It's a nice set but just not for me, great review and I hope we get a Cloud Car sold separately some time.

Gravatar
By in Germany,

Actually, the first Stormtrooper Helmets to appear in sets came in 2001 (7146 TIE Fighter), not 1999 ;)

That aside, does the printing on Lobot's head continue all around it? Or are there gaps on the sides, like it was common in the past for such designs (Spider-Man, TMNT Foot Soldier etc.)?

Gravatar
By in United States,

Could that ladder under the Cloud Car landing pad have been put there to re-enact Luke hanging off the antenna underneath Cloud City?

I know it's not in the right place for that, but that was my initial thought upon seeing that picture in the review.

Gravatar
By in France,

I've been a little surprised- if not deceived - when the first pictures were revealed. But it took only a few hours before my interest grew quickly upon this one, looking closely at the available views of it. It's so nice! So beautiful... So many nice details, so much attention given to create in Lego form those different rooms and places of Cloud city. I am amazed by the level of details of the walls, doors, stairs, passages through rooms and so on. Not to mention the minifig selection and the quality of them all (Leia in her robe is so perfect). It's definitely a set I would really really like to get. Too expensive for me as mentioned elsewhere, but damn', it must be so pleasant to build, knowing that there are always things and surprises to discover in a lego set. One that I will really dream about for long, which is something that had not happened for a while... Thank you for the deep insight review. This set is a beauty.

Gravatar
By in United Kingdom,

The minifigs are great especially luke with pink eye.. Lol nice touch, also love han solo with that newer hair do i have that wig & made a minidoll version of Han solo a while back going to try doin a skywalker minidoll next:
I do wish they'd of made the carbonite mould ellement with Hans updated hair style sculpted on it, also the cloud cars need to look more orange instead of Red, the dining room is nicely detailed for a small section and i love the smaller version of slave one, tbh the sensor balcony is a quite good piece of scenery my favourite of the set,
Might need a hand though lol..

Great review n more the force be with you:

Gravatar
By in United States,

First, great review.

Second, I am as undecided about this set as I was when it was first announced.

I have been wanting a Cloud City set for years, but this one, although close to my expectations, isn't quite all the way there to justify the $349 purchase.

What would have made this a day one buy for me:
1) updated Han Solo carbonite mold
2) correct Bespin Leia hair mold
3) add a second Ugnaught with apron
4) and last but not least, expand the light saber duel area -- it is much too cramped

I do love the Hoth Han Solo, Boba Fett and Lando Calrissian minifigs, and I am impressed with the design and shooshability of the ships (although the cloud car should have obviously been dark orange).

In the end I'll probably end up getting it, but not today.

Gravatar
By in Germany,

Cool to finally see some close-ups. Leaving the price aside, this is a good and proper set. Of course I'm not 100% content with it, but it's still a good one.
Favourite parts are the entrance portal which somewhat represents the "outside view" of the city, the well-designed wall of the red torture chamber area, which looks very movie-accurate to my mind and the brick-built mural in the hallway.
I have always remembered Cloud City for it's rooms and the events that took place inside so I think it is cool the designers rather focussed on the interior than the exterior with this model.

Gravatar
By in Netherlands,

No-one requesting a white rangefinder for Boba for this kind of money?

(yes I said it... ;))

Gravatar
By in United States,

Great review! It definitely has some letdowns, but overall, I think it's a pretty cool set!
Also, I just wanna let you know, the Lobot in this set is defininetly not identical to that of 9678 Twin-Pod Cloud Car & Bespin. The Torsos are very very similar, but still different. And the heads are very different. In 9678 he has those weird thick black eyebrows. The one included in this set is absolutely superior. ;)

Gravatar
By in United States,

Excellent review! One of your best reviews this year. What a great set this is. Too pricey. I wish I had that money.

Gravatar
By in Russian Federation,

«10188 Death Star was among my favourite sets as a child»

A-ha-ha, but it was only 10 years ago, gosh, I'm old.

Gravatar
By in France,

Great review.
Overall it looks like it achieves its objective of being a thoroughly good playset for generous parents to give.
I love the minifigs as well but that’s not enough to convert me from ‘true’ UCS display models!!!

Gravatar
By in United States,

Thanks for another detailed review Captain! So many must have Minifigures, at a price and value that I wouldn't touch with a stick... what a dilemma.

Gravatar
By in Norway,

This is... I’ll be honest and say that in my opinion it is the worst set in the exclusive range yet. It seems like a giant mashup with no coherence. Feels rushed and looks horrible on display. The only value I see here is playability.

Gravatar
By in United Kingdom,

I just want to point out that Han's hair when he is in carbonite in the films is quite flat unlike his usual look so the Lego piece actually looks fine. I can't believe that that and Leia's hair are turn-offs for people.

I am still in love with the new Han fig with the boots and side-leg printing. All time great fig in my opinion. That is also my favourite Han outfit so I pains me that I will not be able to obtain him.
The Luke fig looks great too. I like his NOOOOOOO! face. They have represented his expression well without going too far.

Gravatar
By in United States,

I think this set has a lot of great design and play features and the minifigs are great. This review really demonstrated that. I do think that the low part count is the real problem with the set. Those extra pieces could have been put to use as exterior walls and to finish the set better. Another 500 pieces would go a long way.

Gravatar
By in United Kingdom,

Excellent review. I think it is much better to have a single one part review rather than one split in two parts.

Gravatar
By in United States,

I don't think a perfect of version of this could be made that would make everyone happy. However I really like it and hope to get one before it retires. Thanks for all of the great pictures on this

Gravatar
By in Sweden,

Many thanks for this excellent review, full of great details and photos! Must say that I really like this set, and I'm sure it must be a dream for a lot of kids - a very expensive and possibly unfulfillable dream, that is.

If I could wish for anything more it'd be some further photos including the minifigs inside the different areas of the model. And oh some of the photos take you to Flickr rather than zooming when you click on them, like Luke.

@Judgeguy: That's a good point actually, I guess if they updated the carbonite piece it should rather include an exclusive flat hair style.

Gravatar
By in United States,

I wasn’t going to buy this set however it turned out - that being said, even for a playset this feels, as someone else commented, lacking. My biggest gripe is the walls. They look so plain and just messy, and I’m having a hard time understanding why or how they couldn’t have done a better job making them look much better than they do.

The set just looks unfinished.

Gravatar
By in United States,

Nobody's complaining about the lack of an ice cream maker? Just me?

Gravatar
By in Sweden,

That back wall of the dining room sticking out over the base is the sloppiest contruction solution I´'ve seen in a long time.
Gigantic hard pass for me, just an overall mess of trumpian proportions.

Gravatar
By in United States,

I like the minifigs and the Slave I - Lego can keep the rest. Perhaps I'll sell my 2003 Cloud City and buy one for the figures...

Gravatar
By in Canada,

I love it. Can't wait.

Gravatar
By in Switzerland,

Hm..I think you should check your white balance settings, because for a second I believed that the cloud car is almost correct colour...

Gravatar
By in United States,

^BrickByBrick: Where is Willrow Hood? ;)

Gravatar
By in United Kingdom,

What parent buys $900 worth of LEGO Death Stars?

Gravatar
By in Germany,

Wanted to read this review but gave up after constant barrage of ads.....absolutly ridiculous.
get rid of them......

Gravatar
By in United States,

I’ll keep this simple. Nope. The weather platform looks like it belongs in another set. That part is pretty nice.

Gravatar
By in United States,

Moustache guard! One of my old Star Wars magazines from the 90s had an article on him!

Gravatar
By in United States,

Looks great. Lot of people waited a long time for this one. I'm not one of them, but I'm really happy for those who are!

Gravatar
By in United Kingdom,

The biggest problem with thIs set is unfortunately it’s not obvious what it is; if you managed to find somewhere to put it, had it out, had people round and they asked about it including how much it cost, say c£300 (or equivalentl) that does sound completely mad!!

After alot of thought this really is a huge pass and saving for me, sorry!

The reality is there are far, far better ways to spend c£300 on LEGO...

Gravatar
By in France,

It's definitely what I was expecting from this set: a huge playset.
My main concerns are the price and the available room...
Anyway, with a price already high, I think there was no way to properly mix a playset and an exposition model.
Thanks for the review.

Gravatar
By in United Kingdom,

Not sure that I could justify the expense for just three mini figures. Pass.

Gravatar
By in Viet Nam,

they are making counterfeit every where, like this Lepinweb . How to report them?

Gravatar
By in United States,

The images make the cloud car look orange, anyone else having difficulty seeing it as red?

View more reviews »
Return to home page »